 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GaAs MMIC GN04042N GaAs N-Channel IC Unit: mm Features * Low insertion: LOSS = 0.27 dB (CDMA) * High isolation: ISO = 30 to 35 dB (CDMA) * Small package 4 56 0.1 C 0.960.14 Absolute Maximum Ratings Ta = 25C Parameter Power dissipation Control current Maximum input power CDMA, PCS GPS Topr Tstg Symbol PD Vctrl(H)-Vctrl(L) PIN Rating 150 +5 35 20 -30 to +90 -40 to +120 C C Unit mW V dBm 1: 4: 7: 10: 0.26 0.7 METAL LEAD 3.0 High-frequency high-power output SP3T switch for Mobile Communication The terminal for CDMA/PCS/GPS 3.0 12 11 10 G 1 2 3 9 8 7 C DETAIL G VIEW ROTATED 90 CLOCKWISE Gnd Vctrl3 Gnd Gnd 2: 5: 8: 11: Ant 3: Gnd GPS-RX 6: Gnd CDMA-TX/RX 9: Vctrl2 PCS-TX/RX 12: Vctrl1 CQF12-N1 Package Operating ambient temperature Storage temperature Electrical Characteristics * CDMA (Vctrl(L) = 0 V, Vctrl(H) = 3.0 V, f = 824 MHz to 894 MHz, Ta = 25C 3C) Parameter Insertion loss Isolation Symbol LOSS ISO Conditions ANT-CDMA_TX/RX (PIN = 26 dBm) ANT-PCS_TX/RX (Correspond of ANT-CDMA_TX/RX ON) ANT-GPS_RX (Correspond of ANT-CDMA_TX/RX ON) Voltage standing wave ratio * Input 0.1 dB compression 2nd harmonics * 3rd harmonics * Control current Note) *: Designed specification VSWR PIN(0.1 dB) 2fO 3fO Ictrl ANT-CDMA_TX/RX ANT-CDMA_TX/RX ANT-CDMA_TX/RX (PIN = 26 dBm) Non-modulation signal ANT-CDMA_TX/RX (PIN = 26 dBm) Non-modulation signal ANT-CDMA_TX/RX 30 25.0 30.0 Min Typ 0.27 30.0 34.8 1.20 33 -76 -75 0.16 -65 -68 9.0 1.35 dBm dBc dBc A Max 0.50 Unit dB dB Publication date: January 2004 SGB00020BED 1 GN04042N Electrical Characteristics (continued) * PCS (Vctrl(L) = 0 V, Vctrl(H) = 3.0 V, f = 1 850 MHz to 1 990 MHz, Ta = 25C 3C) Parameter Insertion loss Isolation * * Symbol LOSS ISO Conditions ANT-PCS_TX/RX (PIN = 24.0 dBm) ANT-CDMA_TX/RX (Correspond of ANT-PCS_TX/RX ON) ANT-GPS_RX (Correspond of ANT-PCS_TX/RX ON) Min 19.0 20.0 Typ 0.33 22.0 26.0 1.10 Max 0.50 Unit dB dB Voltage standing wave ratio * Input 0.1 dB compression 2nd harmonics * 3rd harmonics * Control current * Note) *: Designed specification * VSWR PIN(0.1 dB) 2fO 3fO Ictrl ANT-PCS_TX/RX ANT-PCS_TX/RX ANT-PCS_TX/RX (PIN = 24.0 dBm) Non-modulation signal ANT-PCS_TX/RX (PIN = 24.0 dBm) Non-modulation signal ANT-PCS_TX/RX 30 1.30 -65 -74 9.0 dBm dBc dBc A 33 -76 -78 0.14 * GPS (Vctrl(L) = 0 V, Vctrl(H) = 3.0 V, f = 1 574 MHz to 1 577 MHz, Ta = 25C 3C) Parameter Insertion loss Isolation * * Symbol LOSS ISO Conditions ANT-GPS_RX (PIN = 10.0 dBm) ANT-CDMA_TX/RX (Correspond of ANT-GPS_RX ON) ANT-PCS_TX/RX (Correspond of ANT-GPS_RX ON) Min 20.0 20.0 Typ 0.32 24.0 25.0 1.1 0.16 Max 0.55 Unit dB dB Voltage standing wave ratio * Control current * VSWR Ictrl ANT-GPS_RX ANT-GPS_RX 1.35 9.0 A Note) *: Designed specification 2 SGB00020BED GN04042N Test Circuit ANT 100 pF Vctrl3 GPS-RX 1 000 pF 4 5 51 pF 100 pF 6 3 2 1 12 11 10 1 000 pF Vctrl1 PCS-TX/RX 7 100 pF 8 9 51 pF 100 pF 1 000 pF 51 pF Vctrl2 CDMA-TX/RX Logic Table ON Course ANT-CDMA_TX/RX ANT-PCS_TX/RX ANT-GPS_RX Vctrl1 L H L Vctrl2 H L L Vctrl3 L L H SGB00020BED 3 Caution for Safety This product contains Gallium Arsenide (GaAs). DANGER GaAs powder and vapor are hazardous to human health if inhaled or ingested. Do not burn, destroy, cut, cleave off, or chemically dissolve the product. Follow related laws and ordinances for disposal. The product should be excluded form general industrial waste or household garbage. Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP |
Price & Availability of GN04042N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |